Glider 2 Assignment Example | Topics and Well Written Essays - 750 words

Glider 2 - Assignment Examplefor measuring the length of the microscope slider, scissors, coping axiom I blade and razor blades are the main materials and tools utilized in constructing Basal Gliders. The tools are majorly employ in have sexting unnecessary parts.The construction should begin by constructing the wing and using a woods stripper tool in cutting the thick strips of balsa wood. Moreover, there should be sheet weighing at least 10.6 grams. The sheet was more the one gram but less than 10.6 grams. The remaining parts were constructed with the usable materials and tools. Preparation of fuselage or glider was the first step with for each one base width and partings of tailpiece measured and recorded. Notches and slits were cut from the balsa wood length thus bequeathing to a full glider.All components of glider were assembled by gluing each individual component to the body of glider. This consumed quality time thus permitting adequate time for the drying of each co mponent before attaching the next components. At this stage of glider construction, penny-nose weight was applied to the glider. Eventually, a tape was therefore utilized in affixing each penny to the gliders nose, and ultimately resulting to a full glider.A starting line on the floor was marked using a masking tape. Flight outdo testing had a minimum of 17feet to the landing target such as a desk or chair. The result of the flight test was then recorded on the scorecard. This process aids in predictions of the functionality and reliability of the balsa glide of meeting its target. Testing process used a minimum of two throws for the glider. The weight and residual of the glider was changed by moving the go of the glider forward and backward, which affected the flying process of the airplanes. The wings of the Glide were increased to have a maximum coast distance.Glide Ratio is computed by dividing the glide distance value with the altitude value of the glide. Glide flight-test ing method is normally used to test the gliding distance and